营运船舶航行性能和海洋环境监测平台开发验证

EEDI是衡量船舶能效水平的重要指标.由于试验条件限制,目前主要还是依靠模型试验结果对交船测试进行修正换算得到.上海船舶运输科学研究所自主研发了航行性能和海洋环境监测平台,可对营运船舶开展长期跟踪监测,实时收集船舶营运阶段的航行环境和性能参数,通过自动识别航行状态,划分海区、海况和船舶载况等因素对于船舶功率与航速的影响,可获得营运船舶实际EEDI指标,提高EEDI实船验证结果的准确性.监测平台在某万箱级集装箱船进行相关验证,并已展开长期监测.     

基于航速调整的班轮燃油补给优化

燃油成本在班轮运营总成本中占有很大比重,燃油补给是影响航运公司班轮运营成本和效益的一项重要决策.基于航速调整策略,以班轮运营总成本最小化为目标,建立燃油补给混合整数非线性规划模型,运用分段线性逼近法对燃油消耗函数进行线性化处理,并设计了求解算法步骤.实例分析验证了模型和求解方法的有效性.结果表明,在航运市场需求低迷的情况下,船舶更适宜采取较低的航速,采取灵活的加油港策略或放宽船舶到港时间窗限制,能更为有效地降低燃油成本.     

智能船舶研发风险分析与控制

针对智能船舶研发的风险问题,在介绍智能船舶的概念及智能船舶特点的基础上,通过系统分析智能船舶研发的各种风险,着重从技术和财务2个方面分析风险的因素,提出风险控制的相关对策和措施,为我国企业研发智能船舶进行风险控制提供参考.     

快速脱缆应用技术

针对快速脱缆钩存在的钩体使用角度超范围和单钩承受拉力超安全工作负荷的设计问题,对快速脱缆钩如何保证船舶系泊安全进行研究。从船舶系缆方式、码头靠泊船舶吨级、新旧码头依据规范内容3个方面分析快速脱缆钩使用角度超范围的原因,从风力和涌浪作用及船舶装卸和涨落潮作用2个方面分析快速脱缆钩单钩拉力超负荷的原因,提出加强快速脱缆钩使用管理、升级更新快速脱缆钩、定期检测和设置码头导缆孔的解决问题方法。     

LNG船舷侧碰撞损伤场景下的极限强度研究

液化天然气(LNG)船的船体极限强度是衡量其安全性及环境适应性的重要指标。LNG船在受到撞击损伤后的安全性,不仅取决于船体结构的剩余极限强度,还取决于其围护系统中的绝缘箱能否在船体损伤状态下承受结构变形所引起的应力载荷。利用有限元数值仿真技术和ABAQUS软件,建立LNG船液舱围护系统以及舱段的有限元模型,模拟LNG船舷侧受撞击场景。在碰撞损伤基础上,对含有液舱围护系统的LNG船舱段开展极限强度研究,获取LNG船舱段结构的极限承载能力。研究发现在船体达到极限强度状态之前,液舱围护系统不会失效。     

Toxic air pollutants and trucking productivity in the US

This paper introduces toxic air pollutants into the measurement of trucking productivity to obtain true productivity growth. Our results show that omitting or ignoring toxic air pollutants in measuring trucking productivity yields statistically significant biased productivity estimates in for 2002-2005. Trucking productivity growth was understated by the traditional productivity measure, because the latter did not account for reductions in truck air pollution over time. We also find that the difference between traditional and environmental efficiency scores was negligible, suggesting that environmental constraint did not distort efficiency in the trucking sector.     

基于动态水域网格计算的船舶领域研究

为了满足现代船舶的发展需求,结合船舶自动识别系统(AIS)数据量巨大,包含了丰富的船舶信息等优点.本文利用SQL2012对AIS数据进行处理,建立包含船舶静态信息和动态信息的数据库;借助C#程序语言,构建以中心船舶为原点的网格坐标系,并以船舶间相对距离方位计算周围船舶在网格中的相对位置坐标;对同长度和类型的船舶进行网格叠加计算,并以船舶频数的方式进行统计,采用数据处理软件Matlab以最小二乘法的方式对统计结果进行处理;对研究水域的主要船型不同尺度的船舶领域进行对比和统计分析,并对不同船型船舶领域略作讨论,总结得出开阔水域船舶领域的特点.     

风电运维船与风机塔基耦合水动力响应分析研究

海上风电运维船通常采用船首顶靠海上风机塔基靠船桩的方式来保证风机维护人员的安全登塔,因此对其在相应海况条件下的纵摇、升沉等水动力响应进行分析研究很有必要.本文采用Fine/Marine和AQWA软件,对某运维船在实际海况条件下的耦合水动力响应进行分析研究,从而为风电维护人员的安全登离以及辅助登离设备的研发提供参考.     

Hierarchal assessment of noise pollution in urban areas – A case study

Noise pollution in urban areas has many harmful effects on the citizens. There are varieties of noise generation sources of which the traffic noise could be a major source. The point which is perhaps less noticed is that sound level is not the only parameter to indicate the extent and intensity of noise pollution. Situation of urban land uses, distribution of population centers and types of passages can deeply affect the concern on this environmental issue but not with a similar ratio. This article presents an overlaying technique to define noise prone areas using all different factors involved. A case study was carried out in the District 14 of Tehran Metropolitan City where there are busy streets and highways. For this purpose, the share of each criterion in noise pollution intensity was determined using Analytical Hierarchy Process (AHP). Afterwards, the map layers were overlaid based upon the relative importance of the criteria to get the final map on which the noise prone areas are specified. The developed method could be used as a tool for indirect estimation of noise pollution by which instead of direct measurement of the equivalent sound level, it would be possible to predict noise susceptible areas considering the most important influential factors.     

Tuning of transfer functions for analysis of wave–ship interactions

Transfer functions are often used together with a wave spectrum for analysis of wave–ship interactions, where one application addresses the prediction of wave-induced motions or other types of global responses. This paper presents a simple and practical method which can be used to tune the transfer function of such responses to facilitate improved prediction capability. The input to the method consists of a measured response, i.e. time series sequences from a given sensor, the 2D wave spectrum characterising the seaway in which the measurements are taken, and an initial estimate of the transfer function for the response in study. The paper presents results obtained using data from an in-service container ship. The 2D wave spectra are taken from the ERA5 database, while the transfer function is computed by a simple closed-form expression. The paper shows that the application of the tuned transfer function leads to predictions which are significantly improved compared to using the transfer function without tuning.